manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 187 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 187

• update: To delete old records and register new records.
• add: To add new records and store the old records.
• When CNAME overlaps, it is always changed, irrespective of settings.

CNAME registration

msh> dns cname {on|off}

• You can specify whether to register CNAME.
• {on} means "active" and {off} means "inactive".
• The CNAME registered is the default name beginning with rnp. CNAME cannot be changed.

A records registration

msh> dns arecord {dhcp|own}

• dhcp: You can specify the method of registering an A record when the dynamic DNS function

is enabled and DHCP is used.

• own: To register an A record using the printer as the DNS client.

The DNS server address and the domain name already designated are used for the registration.

Record updating interval settings

msh> dns interval [1-255]

• You can specify the interval after which records are updated when using the dynamic DNS

function.

• The updating interval is specified hourly. It can be entered between 1 and 255 hours.
• The default is 24 hours.

resolv.conf display

msh> dns resolv

Specifying the protocol when asking names during dual stacking

msh> dns resolv protocol {ipv4|ipv6}

• Appears during dual stacking only.

domainname

Use the "domainname" command to display or configure the domain name settings.

View settings

The following command displays the current domain name:

msh> domainname

Interface domain configuration

msh> domainname "interface_name"

Remote Maintenance by telnet

185

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов