Toshiba e-studio1105 Скачать руководство пользователя страница 232

Страница: 232 / 396

Understanding the Displayed Information

This section explains how to read status information returned by the network interface board.

Print Job Information

Use the following command to display print job information:

• UNIX: Use the “info” command and “rsh”, “rcp”, “ftp”, and “sftp” parameters.
• mshell: Use the “info” command.

Rank

Print job status.

• Active

Printing or preparing for printing.

• 1st, 2nd, 3rd, 4th...

Waiting to be transferred to the printer.

Owner

Print request user name.

Job

Print request number.

Files

The name of the document.

Total Size

The size of the data (spooled).
The default is 0 bytes.

Print Log Information

This is a record of the most recent jobs printed.
Use the following command to display print log information:

• UNIX: Use the “prnlog” command and “rsh”, “rcp”, “ftp”, and “sftp” parameters.
• telnet : Use the “prnlog” command.

Print request ID.

5. Monitoring and Configuring the Printer

230

Содержание e-studio1105












































































































































































































































































































































































































Результаты поиска

Содержание e-studio1105

Отзывы:

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 232 / 396

Результаты поиска

Содержание e-studio1105

Отзывы: