manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 281 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 281

You can enter a path using up to 256 characters.

20.

To change the port number, press [Change] right "Port Number".

21.

Enter the port number using the number keys, and then press the [ ] key.

You can enter 1 to 65535.

22.

Press [Connection Test] to check the path is set correctly.

23.

Press [Exit].

If the connection test fails, check the settings, and then try again.

24.

Press [OK].

25.

Press [Exit].

26.

Press the [User Tools] key.

• To register the name, see "Registering Names".
• You can enter up to 191 characters for the user name.
• You can enter up to 128 characters for the password.
• You can enter a server name using up to 64 characters.
• If User Authentication is specified, contact your administrator.

• p.38 "File Transfer"
• p.254 "Registering Names"

Changing a FTP Folder

This section describes how to change the registered FTP folder.

1.

Press the [User Tools] key.

2.

Press [System Settings].

Registering Folders

279

6

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов