Toshiba e-studio1105 Скачать руководство пользователя страница 362

Страница: 362 / 396

• No security settings made.
• If security settings are made, an IP-specified client (this printer) permits updating.

DNS Servers Targeted for Operation

For static IP setting

• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003

R2/2008 features

• BIND 8.2.3 or higher

For DHCP setup, when the printer updates the A record

• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003

R2/2008 features

• BIND 8.2.3 or higher

For DHCP setup, when the DHCP server updates records

• Microsoft DNS servers with standard Windows 2000 Server/Windows Server 2003/2003

R2/2008 features

• BIND 8.2.3 or higher
• DNS servers with standard NetWare 5 (or a higher version) features

For IPv6 setting

• Microsoft DNS servers with standard Windows Server 2003/2003 R2/2008 features
• BIND 9.2.3 or higher

DHCP Servers Targeted for Operation

As a substitute for the printer, DHCP servers capable of updating the A record and PTR record are as
follows:

• Microsoft DHCP servers with standard Windows 2000 Server (Service Pack 3 or higher versions)/

Windows Server 2003/2003 R2/2008 features

• ISC DHCP 3.0 or higher
• DHCP server with standard NetWare 5 features

Setting the Dynamic DNS Function

Make settings with telnet using the “dns” command.

8. Appendix

360

Содержание e-studio1105












































































































































































































































































































































































































Результаты поиска

Содержание e-studio1105

Отзывы:

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 362 / 396

Результаты поиска

Содержание e-studio1105

Отзывы: