manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 385 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 385

Trademarks

Microsoft

®

, Windows

®

, Windows Server

®

, and Windows Vista

®

 are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.
Adobe, Acrobat, Acrobat Reader, PostScript, and Reader are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United States and/or countries.
Apple, AppleTalk, Bonjour, EtherTalk, Macintosh, Mac OS, and TrueType are registered trademarks of
Apple Inc., registered in the U.S. and other countries.
Citrix

®

 and MetaFrame

®

 are registered trademarks of Citrix Systems, Inc.

IPS is a trademark or registered trademark of Zoran Corporation and/or its subsidiaries in the United States
or other countries.
Linux

®

 is the registered trademark of Linus Torvalds in the U.S. and other countries.

Monotype is a registered trademark of Monotype Imaging Inc.
NetWare, IPX, IPX/SPX are either registered trademarks or trademarks of Novell, Inc.
PCL

®

 is a registered trademark of Hewlett-Packard Company.

UNIX is a registered trademark in the United States and other countries, licensed exclusively through, X/
Open Company Limited.
UPnP is a trademark of the UPnP Implementers Corporation.
Other product names used herein are for identification purposes only and might be trademarks of their
respective companies. We disclaim any and all right to those marks.
The proper names of the Windows operating systems are as follows:
*The product names of Windows 2000 are as follows:
Microsoft

®

 Windows

®

 2000 Professional

Microsoft

®

 Windows

®

 2000 Server

Microsoft

®

 Windows

®

 2000 Advanced Server

*The product names of Windows XP are as follows:
Microsoft

®

 Windows

®

 XP Professional Edition

Microsoft

®

 Windows

®

 XP Home Edition

Microsoft

®

 Windows

®

 XP Media Center Edition

Microsoft

®

 Windows

®

 XP Tablet PC Edition

*The product names of Windows Vista are as follows:
Microsoft

®

 Windows Vista

®

 Ultimate

Microsoft

®

 Windows Vista

®

 Business

Microsoft

®

 Windows Vista

®

 Home Premium

Microsoft

®

 Windows Vista

®

 Home Basic

Trademarks

383

8

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов