manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 177 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 177

Remote Maintenance by telnet

• Remote Maintenance should be protected so that access is allowed to administrators only.
• The password is the same as the one of Web Image Monitor administrator. When the password is

changed using "mshell", other's change also.

Using telnet

Follow the procedure below to use telnet.

• Only one user at a time can log on to perform remote maintenance.
• If you are using Windows Vista/7, you must enable the telnet server and telnet client beforehand.

1.

Use the IP address or the host name of the machine to start telnet.

% telnet "IP address"

2.

Enter your user name and password.

For details about the user name and password, consult your network administrator.
For user authentication, enter a login user name and password.
For user code authentication, enter a user code in User Name.

3.

Enter a command.

4.

Quit telnet.

msh> logout

The configuration message about saving the changes appears.

5.

Enter "yes" to save the changes, and then press the [Enter] key.

If you do not want to save the changes, enter "no", and then press the [Enter] key. To make further
changes, enter "return" at the command line, and then press the [Enter] key.

• If the message "Can not write NVRAM information" appears, the changes are not saved. Repeat the

procedure above.

• When the changes are saved, the network interface board is reset automatically with that changes.
• When the network interface board resets, the print job in print process will be printed. However, print

jobs in queue will be canceled.

Remote Maintenance by telnet

175

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов