manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 45 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 45

Administrator Tools

This section describes the user tools in the Administrator Tools menu under System Settings.
Administrator Tools are used by the administrator. To change these settings, contact the administrator.
We recommend specifying Administrator Authentication before making Administrator Tools settings.

Address Book Management

You can add, change or delete information registered in the Address Book.
For details, see "Address Book".

• Program / Change

You can register and change names as well as user codes.

• Names

You can register a name, key display, registration number, and title selection.

• Auth. Info

You can register a user code, and specify the functions available to each user code. You
can also register user names and passwords to be used when sending e-mail, sending files
to folders, or accessing a LDAP server.

• Protection

You can register a protection code.

• E-mail

You can register an e-mail address.

• Folder

You can register the protocol, path, port number, and server name.

• Add to Group

You can put names registered in the Address Book into a group.

• Delete

You can delete a name from the Address Book.

You can register up to 2,000 names.
You can register up to 500 user codes.
You can also register and manage names in the Address Book using Web Image Monitor or
SmartDeviceMonitor for Admin.

Address Book: Program / Change / Delete Group

Names registered in the Address Book can be added into a group. You can then easily manage the
names registered in each group.

• Program/Change

Administrator Tools

43

1

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов