manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 171 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 171

Printer Status Notification by E-Mail

Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is issued to the registered
addresses to notify the printer status.
For this notification, you can make the e-mail notification settings.
Notification timing and e-mail content can be set.

• Depending on your e-mail application, a phishing warning might appear after you receive an e-mail

message. To prevent phishing warnings appearing after you receive e-mail from a specified sender,
you must add the sender to your e-mail application's exclusion list. For details about how to do this,
see your e-mail application's Help.

The e-mail notification functions you can set are as follows:

• Auto e-mail notification

Information including the machine status is automatically sent by e-mail. Before you use this function,
register the e-mail address to be used.

• On-demand e-mail notification

Information including the machine status is sent by e-mail when a request from the administrator is
received.

The information that can be notified by auto e-mail notification is as follows:

• Call Service
• Out of Toner
• Toner Almost Empty
• Paper Misfeed
• Cover Open
• Out of Paper
• Almost Out of Paper
• Paper Tray Error
• Output Tray Full
• Unit Connection Error
• Duplex Unit Error
• Waste Toner Bottle is Full
• Waste Toner Bottle is Almost Full
• Add Staples
• Hole Punch Receptacle is Full

Printer Status Notification by E-Mail

169

5

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов