manualshive.com logo in svg

Toshiba e-studio1105, Руководство по эксплуатации, Страница: 317 / 396

Поделиться
Скачать
Toshiba e-studio1105 Скачать руководство пользователя страница 317

• Min.: -0.3 %
• Step: 0.1 %

The default setting is "0" %.

• Back Side

• Max.: 0.4 %
• Min.: -0.4 %
• Step: 0.1 %

The default setting is "0" %.

• Settings specified for the front side of sheets are applied to both the front and back side of each sheet;

settings specified for the back sides of sheets are applied only to the back side of each sheet.

• If settings for both the front and back sides of sheets are specified, the magnification setting for the

back side of each sheet is determined based on the value specified for "front side".

• If the magnification value for the back side are different from those specified as the default, duplex

printing speed might be lowered.

0106: Select Test Pattern for Image Position Adjustment

Select the test image used when adjusting the image position.

• Copy Image

The scanned image is printed.

• Frame Image

The framed image is printed. The scanned image will not be printed.

0107: Adjust Toner Fusing Temperature

Adjust the toner fusing unit temperature according to the paper type/thickness. A higher temperature
produces improves toner fixation. A lower Temperature reduces paper curl and corrugation but
degrades toner fixation.

• Normal
• Higher
• High
• Lower
• Low

The default setting is "Normal".

0108: Adjust Paper Feed Speed

When using non-standard paper such as thick paper or special paper, select a paper feed speed
that is suitable for the paper type.

Adjustment Settings for Operators

315

8

Содержание e-studio1105













































































































































































































































































































































































































Отзывы:

Нет отзывов