disconnect this end of the bypass hose (Figure 51).
Retain the medium fork at this location for later use.
G005898
1
2
3
4
Figure 51
1.
Bypass hose, existing
3.
Tank drain, installed
previously
2.
Large fork
4.
Retainer fork, medium
4. Remove the bypass hose from the tank underside.
5. Locate the tee connection in loose parts. Remove
the retainer forks.
6. Locate the filter flush hose coming from the bottom
of the pressure filter assembly installed previously.
Install the open 90 degree fitting from this hose to
the middle connection of the tee (Figure 52). Use a
small retainer fork to secure the connection. Leave
the tee fitting laying on the fender of the right, rear
wheel.
2
G005899
1
2
3
4
Figure 52
1.
Right, rear fender
3.
Filter flush hose, from
pressure filter
2.
Tee connection
4.
Pressure filter
24
