TM RACING 2012 TM 100 MX, Руководство пользователя и по обслуживанию

Страница: 14 / 84

ENGLISH
ENGLISH
14
IGNITION SWITCH
In the SMR and SMM models a lock (1) for the ignition key is added on
the left side of the dashboard.
By turning the key clockwise, the electric circuit is closed and you can
press the kickstart pedal up the engine.
Turn the key anticlockwise to turn off the engine.
Before leaving the bike extract the key from the lock.
FUEL FILLER CAP
The fuel fill cap is found on top of the tank.
Open: turn the cap in an anti-clockwise direction
Close: place the cap on the inlet well and tighten it in a clockwise direc -
tion.
Position the tank’s open vent pipe (2) preventing bends or crushing and
making sure that it is inserted correctly.
FUEL TAP
The tap (3) is located on the left hand side of the tank base.
OFF
On the OFF position, the fuel tap is closed.
ON On the ON position, the fuel tap is open.
When the motorcycle is used, turn the tap to the ON position. In
this way the fuel flows to the carburetor and the tank empties up
to reserve.
RES On the RES position, the reserve is used. After having filled up
the tank, do not forget to move the tap back to the ON position.
Tank capacity:
85/100 Senior and 125/144 END/MX/SMR/SMM lt. 10 (incl. reserve 1 lt.)
85/100 Junior lt. 6.5 (di cui 1 di riserva)
CHOKE COMMAND (COLD STARTER)
This command is located on the carburetor.
For MIKUNI carburetors (85cc-100cc) and KEIHIN carburetors (125cc-
144cc)
By fully extracting the choke knob (4), a passage is opened in the car -
buretor, through which the engine can suck additional fuel. In this way,
a “rich” air-fuel mix is obtained. This is necessary for starting the engine
when it is cold.
To disconnect the command, push the choke knob inwards to its original
position.
OPERATING CONTROLS
OPERATING CONTROLS