TM RACING 2012 TM 100 MX, Руководство пользователя и по обслуживанию

Страница: 11 / 84

ENGLISH
ENGLISH
11
OPERATING CONTROLS
OPERATING CONTROLS
ELECTRONIC DIGITAL TACHOMETER (END)
See n.1 in the picture. It has a large backlit display and four pilot
lights.
On the LH side, in the top there is the high beam pilot light (2), in the
centre there is the neutral pilot light (3) not used, in the bottom there is
the ADJUST button (4).
On the RH side, in the top there is the indicator pilot light (5), in the
centre there is the low beam pilot light (6), in the bottom the SELECT
button (7).
In the display you can find the digital speed indicator (tachometer) (8),
the trip odometer TRIP (9) or the total odometer ODO (10).
To switch from TRIP to ODO display, press briefly the ADJUST button
once. Repeat the operation to switch from ODO to TRIP.
The instrument unit is the Km/h but you can set it in Mph in the follow -
ing way: press both ADJUST and SELECT buttons for 3 seconds. The
measurement unit will blink. Press ADJUST button to switch from Km/h
to Mph and viceversa.
Press briefly the SELECT button 7 times to complete the new setting
and come back to the initial screen.
The trip odometer can be reset by holding pressed the “SET” button
once for 5 seconds.
The total kilometres odometer resets automatically when reaching the
limit of 99999 Km or Miles.
ELECTRONIC DIGITAL TACHOMETER (SMR/SMM)
See n. 10 in the picture. It has a wide backlit display and four pilot
lights.
In the top there are the left indicator pilot light (11) , the low beam pilot
light (12), the high beam pilot light (13) and the right indicator pilot light
(14).
Inside the display you find the tachometer (15), the trip odometer (16)
and the total kilometers odometer (17).
In the bottom there are two buttons, “SET” (18) and “MODE” (19).
The instrument unit is the Kmh but it can be easily changed in Mph in
the following way: press and hold the “SET” button, while holding it press
once the “MODE” button.
Repeat the same operation to switch back to Kmh.
The trip odometer can be reset by holding pressed the “SET” button
once for 4 seconds.
The total kilometres odometer resets automatically when reaching the
limit of 99999 Km or Miles.
The SMR and SMM models (END on request) are supplied with a sepa -
rate battery for using the speedometer while the engine is OFF. This is
under the saddle.