ENGLISH
ENGLISH
47
FRAME AND ENGINE MAINTENANCE
FRAME AND ENGINE MAINTENANCE
WARNING
- DO NOT ALLOW BRAKE FLUID TO COME INTO CONTACT WITH PAINTED
PARTS, THE BRAKE FLUID CORRODES PAINT.
- USE ONLY CLEAN BRAKE FLUID OUT OF A HERMETICALLY SEALED
CONTAINER.
FRONT BRAKE BREMBO RADIAL PUMP
(SMR/SMM)
FRONT BRAKE LEVER ADJUSTMENT
The distance of the front brake lever from the handlebar grip can be ad
-
justed through the adjustment knob (6). Turning it clockwise the distance
increases, turning it anticlockwise the distance decreases.
WARNING
AT THE END OF THE OPERATION VERIFY THAT THE FRONT BRAKE LEVER
HAS A FREE STROKE BEFORE THE BRAKE STARTS TO LOCK THE WHEEL
AND THAT THE FRONT WHEEL CAN ROTATE FREELY WITH THE BRAKE
LEVER AT REST. IF THE FREE STROKE IS MISSING, PRESSURE IS FORMED
IN THE BRAKING SYSTEM AND THE CONSEQUENCE CAN BE LACK OF
FUNCTIONING OF THE FRONT WHEEL BRAKE DUE TO OVERHEATING OR
BLOCKING OF THE WHEEL ITSELF.
CHECK FLUID LEVEL
The reservoir (7) is transparent and allows you to check for the fluid level:
with the reservoir standing up, the fluid level must be always between
MAX and MIN remarks.
If the fluid level falls below the MIN value, unscrew and remove the cap
(8) and the membrane (9). Top-up the fluid to the MAX value and close
the tank.
IF THE BRAKE FLUID LEVEL FALLS BELOW THE MINIMUM VALUE, IT MIGHT
INDICATE A LEAKING IN THE BREAKING SYSTEM OR CONSUMPTION OF
BRAKE PADS BEYOND THE ACCEPTABLE LIMIT.
CHECK FRONT BRAKE PADS
The brake pads can be checked from below. The thickness of the pad
friction material must not be less than1 mm.
THE THICKNESS OF THE BRAKE PAD THICKNESS MATERIAL MUST NOT
BE LESS THAN 1 MM, OTHERWISE THERE COULD BE A FAULT IN THE
BRAKES. IN THE INTEREST OF YOUR SAFETY HAVE THE THE PADS RE-
PLACED IN TIME.
WARNING
IF THE BRAKE PADS ARE REPLACED TOO LATE AND ARE COMPLETELY
WORN, THE STEELPARTS OF THE PADS RUB ON THE DISC. THIS LEADS
TO A NOTABLE DECREASE IN THE BRAKING EFFECT AND DAMAGE OF
THE BRAKE DISC.
DANGER
Содержание 2012 TM 100 MX
