TM RACING 2012 TM 100 MX, Руководство пользователя и по обслуживанию

Страница: 61 / 84

ENGLISH
ENGLISH
61
FRAME AND ENGINE MAINTENANCE FRAME AND ENGINE MAINTENANCE
WARNING
REPLACE THE FIBREGLASS CARTRIDGE WITH A NEW ONE OF THE SAME
BASIC WEIGHT OR BOUGHT AT A TM AUTHORIZED DEALER.
FIBREGLASS LENGTH:
85cc / 100cc MX L=255mm
125cc / 144cc MX L=320mm
125cc / 144cc END L=435mm
125cc / 144cc SMR/SMM L=435mm
CLEANING THE AIR FILTER
A dirty air filter jeopardises the filtering of air, reducing engine power and
increasing fuel consumption. In some cases, the dust can even reach
the engine causing derious damage. For this reason, maintenance of
the filter should be carried out regularly.
Remove the seat to access the filter and lift the control unit support.
To remove the filter, unscrew the finger screw positioned at the centre
of the filter and carefully slide it the filter out of its case.
WARNING
- DO NOT CLEAN THE FOAM FILTER WITH FUEL OR KEROSENE, WHICH
CAN CORRODE IT. FOR CORRECT MAINTENANCE OF THE FOAM FILTER,
USE THE RELEVANT PRODUCTS ON THE MARKET FOR CLEANING AND
LUBRICATION.
- NEVER START-UP THE MOTORCYCLE WITHOUT THE AIR FILTER. THE
INFILTRATION OF DUST AND DIRT CAN CAUSE DAMAGE AND INCREASE
WEAR.
Wash the filter carefully using a special liquid detergent and dry well:
squeeze the filter slightly but do not wring it. Also clean the filter case
and check that the rubber manifold that connects the carburetor to the
filter case is integral and positioned correctly.
Remount the air filter, positioning it correctly on the rest surface, taking
care that edges of the filter are not raised or not adherent with the rest
surface.
Remount the finger screw and tighten it adequately.
5
4
4