10 |
P a g e
Tigo Energy, Inc.
|
www.tigoenergy.com
|
Tools & Items Needed for Installation
Table 2 Required Tools
Item
Needed for:
#2 Phillips screwdriver
Removing/replacing covers
1/8” flathead screwdriver
Terminating conductors
Pencil
Marking drill holes
Level
Mounting the equipment
Drill & 8mm drill bit*
Drilling pilot holes for mounting. *Bit size will depend on
the mounting surface material and anchor sizes required.
EI Battery Overview
Left side
Front
Right side
Back
Figure 3 Battery Enclosure Overview
1)
Handle
2)
Battery enclosure
3)
Base
4)
Disconnect switch
5)
DC knockout
6)
Power button
7)
Communications knockout
8)
Inverter connection
wire box
9)
Front cover
10)
LED indicator
11)
Base front cover
12)
Battery expansion wire box
13)
GEC/bonding terminal
14)
Mounting tabs
15)
Heat sink
