19 |
P a g e
Tigo Energy, Inc.
|
www.tigoenergy.com
|
black
terminal labeled
-
.
Outer battery
7)
Connect the
lower outer BAT +
plug to the lower outer battery red terminal
labeled
+
.
8)
Connect the
lower outer BAT -
plug to the lower outer battery black terminal
labeled
-
.
9)
Connect the
lower outer BAT link-out
cable to the
link-out
terminal on the lower
outer battery.
Figure 21 Lower battery connections
10)
After all three batteries have been installed and connected, the
front cover
(
9
) can be
replaced by following the steps to remove the cover in reverse order.
Remember to
plug in the display cable and reconnect the EGC.
The 6 front cover screws should
be torqued to 1Nm.