13 |
P a g e
Tigo Energy, Inc.
|
www.tigoenergy.com
|
Installation requirements
The battery installation must comply with the following requirements.
▪
Select a wall or solid vertical surface that can support the EI Battery.
▪
Select an installation location in which the LED display on the front cover will be easily
viewed.
▪
Select a well-ventilated location sheltered from direct sunlight and rain.
▪
Do not install in cabinets; good ventilation ensures the heat will adequately escape.
o
The ambient temperature should be below 40°C for optimal operation.
▪
Do not install the battery enclosure on structures constructed of highly flammable
materials.
▪
The humidity at the installation location must be 0-100% without condensation.
▪
The installation location shall always be accessible.
▪
Mount the battery enclosure vertically. Do not install horizontally, tilting forward,
sideways or facing upside down.
▪
Do not install and operate the battery on or near easily flammable material.
▪
Ensure the EI Battery is out of reach of children.
▪
Do not cover or place items on the battery enclosure.
▪
Install in a location away from any antennas or any other sources of strong
electromechanical interference.
Note
:
If installing multiple battery enclosures, the battery expansion cables should not
exceed a length of 6ft-7in. Space enclosures accordingly.
The minimum clearances shown below must be observed.
Figure 9 Clearances
