16 |
P a g e
Tigo Energy, Inc.
|
www.tigoenergy.com
|
3)
Unscrew ground conductor and unplug the
display cable then set front cover aside.
Battery module installation
Accessory parts needed: Battery modules (shipped separately, 3 per enclosure)
Unbox the battery modules to prepare for installation. The modules
are shipped with enough charge to allow dark start. The battery
module’s power terminals face the right si
de of the EI Battery
enclosure.
The battery cables are pre-installed and labeled inside the
enclosure. These cables are tied inside the enclosure. These cable
ties will need to be cut in order to make the required connections.
WARNING!
Danger to life from electric shock due to high voltages. High voltages
are present in the DC cables and during the operation of the system.
Do not install and operate the EI Battery on or near easily flammable
material.
CAUTION!
Risk of burns due to hot surfaces. The surface of the battery enclosure
can become very hot. During operation do not touch any portion other
than the wire box compartment. Mount the EI Battery such that it
cannot be inadvertently touched.
CAUTION!
Only make the internal battery connections when the battery EI
Residential Solution will be ready to be turned on and begin charging
the batteries. Never leave batteries connected without the ability to
charge from the grid or PV power.
Figure 15 Display cable and ground
connection
Figure 16 Battery modules
