Tieline Bridge-IT, Руководство пользователя

Страница: 46 / 227

46 Bridge-IT Manual v4.0
© Tieline Research Pty. Ltd. 2019
13.11.1 Configuring SIP Interfaces
The codec supports dialing over two SIP interfaces simultaneously.
Important Notes:
1. SIP interfaces are disabled by default.
2.
SIP1 is configured to use LAN by default, which is mapped to the Primary Via
interface by default.
3. SIP2 is configured to use VLAN1 by default, which is mapped to the Secondary Via
interface by default.
4. SIP1 and SIP2 each need to use a separate IP interface when connecting, e.g. LAN or
VLAN1 .
5. SIP1 and SIP2 can each make multiple SIP calls, e.g. two calls can be made over
SIP1 , or two calls can be made over SIP2 .
6. The settings for SIP1 and SIP2 cannot be edited if the interface is enabled.
7. Enter a public IP address in the Public IP menu if you want to dial over SIP from
behind a firewall. Then configure port forwarding to route traffic to the codec's local IP
address behind your firewall.
To configure SIP1 or SIP2 :
1. Press the the SETTINGS button, then navigate to SIP and press the button.
2. Navigate to Interfaces and press the button.
3. Select either SIP1 or SIP2 and press .
4. Select Disable to disable the interface before editing settings.
5. Navigate to Edit and press the button.