Tieline Bridge-IT, Руководство пользователя

Страница: 159 / 227

159
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
16.25 Monitoring Control Port I/O Status
It is possible to monitor the status of the two control port inputs and two opto-isolated outputs
available using the
CONTROL PORT IN/OUT connector. To monitor status:
1. Open the Toolbox HTML5 Web-GUI and click Control in the Menu Bar , then click Control
Port I/O to display this panel.
2. Click on an output to change the state from Off to On , then click Save . Note: Input states
cannot be changed.
Important Note: Tieline and WheatNet v
irtual logic inputs 5-7 can be activated by
pressing the
F1
button and keypad numbers
1-3
on the codec.
16.26 Adjusting Codec Time and Date
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer
systems over packet-switched, variable-latency data networks. By default
Use NTP time is enabled
in the codec and it will synchronize with ntp.tieserver.com . When the codec is attached to a
network it will automatically ping the selected NTP server every two hours and update the time in
the codec. It is also possible to manually synchronize the time. Note: The codec will not ping a
server while connected.
To manually synchronize time settings in the codec:
1. Open the HTML5 Toolbox Web-GUI and click Settings in the Menu Bar , then click Date &
Time to display the Date & Time panel .
2. Click Force Sync to NTP Time to manually synchronize the codec to NTP time.