Tieline Bridge-IT, Руководство пользователя

Страница: 37 / 227

37
© Tieline Research Pty. Ltd. 2019
Bridge-IT Manual v4.0
3. Navigate to an available speed dial number and press the button.
4. Navigate to a program in the Program List and press the button to select and assign a
program.
Speed Dialing
There are two ways to speed dial.
Option 1:
Press and hold a speed dial number on the
KEYPAD
for two seconds and
then the codec will automatically dial when you release your finger from the keypad.
Note: this is only available for buttons 0-9. Use the following procedure to dial speed
dial number 10 or higher, or speed dial numbers 0-9 if preferred.
Option 2:
1. Press the HOME button to return to the Home screen.
2. Use the numeric KEYPAD to enter the speed dial number.
3. When the Speed Dial screen appears, press the button or the CONNECT button to
connect.
13.8
Dial/Disconnect Multiple Connections
Multiple Connections within Programs
Multi-unicast programs allow you to simultaneously transmit a mono or stereo audio stream to up
to 6 destination codecs. Multi-unicast programs can only be created using the HTML5 Toolbox
web-GUI. There are two ways to simultaneously dial multiple IP audio stream connections multi-
unicast programs:
1. Load the program into the codec via the front panel and dial.
2. Connect to the codec using the Toolbox HTML web-GUI and use the
Program Loader
panel to load the program and then use the Connections panel to connect.
Dialing Multiple Connections via the Front Panel
1. Press the HOME button to return to the Home screen.
2. Use the navigation buttons to select Programs and press the button.
3. Use the up and down navigation buttons to select the multi-unicast program you
want to connect with, then press the CONNECT button to make a connection.
4. The Wait Connecting screen appears briefly and then the Home screen is displayed.
It is also possible to
redial the connection .