Tieline Bridge-IT XTRA, Руководство пользователя

Страница: 92 / 209

92 Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
4. This audio stream connection in the wizard will allow the codec to dial. Enter the name of the
connection in the text box, then click Next .
5. Follow the instructions on the right-hand side of the panel to configure the transport settings for
the connection, then click Next . Note: select UDP/IP +RTP for RFC compliant streaming. If
auxiliary data is enabled the audio stream will not be RFC-compliant.
Important Notes:
·
The encode and decode direction is configured automatically for Encode Only (server
program) or Decode Only (client program). This setting is configured when you select
either Multicast Server or Multicast Client when you first create the program in the
wizard.
·
Use firmware higher than 2.8.xx in the Bridge-IT, Genie and Merlin families of codecs to
enable auxiliary data.
6. Configure the multicast IP address and audio port (the same multicast address and port must be
used for both the server and client programs), then specify which IP streaming interface is used to
dial this connection, e.g.
Primary ( LAN / ETHERNET port and default setting) or VLAN if
configured. Note: By default Any will select Primary .