Tieline Bridge-IT XTRA, Руководство пользователя

Страница: 73 / 209

73
© Tieline Pty. Ltd. 2015
Bridge-IT XTRA Manual
Important Note: Input levels can only be adjusted on analog inputs. See Configuring AES3
Audio for more information about the digital inputs and outputs.
Ganging Channels:
Ganging is useful because it allows you to adjust the audio level of both inputs simultaneously.
1. Click the Input Settings symbol on either channel.
2. Select Gang and click to either gang or ungang channels.
3. When ganged, the two channel sliders move in sync with each other when dragged
using a mouse-pointer.
4. Click the Link symbol to temporarily disable the ganging function and fine-tune channel
audio levels. Click the Link symbol again to resume ganging.
Setting Analog Audio Levels
Audio levels on the Input panel should be set to ensure audio peaks average at the first yellow
indications on the PPM meters, which represents +4dBu. These levels should also be checked
against the
Input PPM Meters on the Master panel . When the codec is not connected the Master
panel will display the input audio going to the outputs (default setting).