Tieline Bridge-IT XTRA, Руководство пользователя

Страница: 40 / 209

40 Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
2. Use the navigation buttons to select Programs and press the button.
3. Use the up and down navigation buttons to select the multi-unicast program you want
to connect with, then press the CONNECT button to make a connection.
4. The Wait Connecting screen appears briefly and then the Home screen is displayed.
It is also possible to
redial the connection .
Disconnect All Connections
1. Press the red DISCONNECT button on the numeric KEYPAD at any time to hangup all
connections.
2. Use the right navigation button to select Yes and press the DISCONNECT button or the
button to confirm the disconnection.
Disconnecting Individual Multi-unicast Connections
It is only possible to disconnect individual connections via the Master panel in the dialing codec's
Toolbox web-GUI.
13.9 Creating a Multicast Server Program
Two different types of multicast programs need to be created when multicasting:
·
A multicast server program is used by the broadcasting codec to send multicast IP packets
to multicast routers on a network.
·
A multicast client program is used by codecs to receive multicast IP audio packets.
Prerequisites:
·
Bridge-IT firmware v.1.01.00 r4219 or higher.
·
ToolBox web-GUI v.1.2.2.3 or higher.
· A multi-unicast license installed in the dialing codec (Note: the multi-unicast license includes
multicast server capability).
Important Notes:
· You cannot edit a program when it is currently loaded in the codec.
· Ensure all connection related settings like the port, algorithm, bit rate (etc) match on
both multicast server and client programs or they will not be able to join multicast
streaming sessions.
· There is no jitter buffer setting in a multicast server program because it is an encode
only program and never receives audio packets.
·
You can lock a loaded custom program in a codec to ensure the currently loaded
program cannot be unloaded by a codec dialing in with a different program type.
·
Always dial the multicast server codec connection first before connecting multicast
client codecs.
·
Multicast client codecs will display return link quality (LQ) only. The Return reading
represents the audio being downloaded from the network locally. Multicast server
codecs do not display LQ readings.
· Forward Error Correction (FEC) is not available for multicast connections.
· It is not possible for a G3 codec to receive multicast IP audio streams.
· To learn more about programs see the section titled "About Program Dialing".
· See Toolbox web-GUI documentation for more detailed information about "Configuring
Multicast Server Programs" or "Configuring Multicast Client Programs"