Tieline Bridge-IT XTRA, Руководство пользователя, Страница: 38 / 209

38 Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
13.5 Redialing a Connection
Press the CONNECT button from any codec menu to redial previous connections (except
menus accessed via the Connect > IP screen).
Manually dialed connections are saved as programs - retaining all the dialing and configuration
information programmed into the codec. A program is identified in the
Recent Program redial
screen using either a previously entered name, or by an IP address (manually dialed connections).
A multi-unicast connection will display the first IP address dialed and the number of additional
connections dialed.
Screen Display Description
1 Manual peer-to-peer
connection
Displays the IP address of an IP connection to a single
end-point
2 Manual multi-unicast
connection (via web-GUI)
Displays the IP address of first codec dialed and the
number of additional codec connections
3 Program name (via web-GUI) Displays the name of a program configured by the
Toolbox web-GUI
Redialing Manually from the Connect IP Screen
From the Home screen select Connect > IP > [Select an IP Session mode] and the codec will
assume you want to dial a new ad hoc manual connection. Press the CONNECT button when
the Connect IP (or Connect SIP ) screen is displayed to retrieve previously dialed IP addresses.
Codec settings for any connection dialed from the IP Connect (or Connect SIP ) screen will include
the current settings in the Setup menu.
13.6 Configuring Auto Reconnect
Auto Reconnect is disabled by default. When enabled the dialing codec attempts to reconnect if
data is temporarily lost over an IP connection. To adjust the setting:
1. Press the HOME button to return to the Home screen, select Connect, then select IP
and press the button.
2. Select the IP Session mode you are using to connect.
3. Select Setup and press .
4. Navigate to A/Recon and press to toggle between Enabled and Disabled .
Important Note: When Auto Reconnect is enabled, the dialing codec will continue to
attempt a connection with the remote codec until Disconnect is pressed either on the