Tieline Bridge-IT XTRA, Руководство пользователя

Страница: 44 / 209

44 Bridge-IT XTRA Manual
© Tieline Pty. Ltd. 2015
KEYPAD to enter the multicast IP address you want to dial, using the or buttons to enter
the periods in the IP address. The same multicast address and audio port must be used for both
the server and client programs. Next, press the down
navigation button to select Setup and
press .
4. Press the down navigation button to select Algor'm (algorithm) and press .
5. Use the navigation buttons to select an algorithm profile or manually choose algorithm settings,
then press .
6. Click to configure your preferred Jitter Buffer setting. Select Auto Adapt and your preferred
automatic jitter setting, or Fixed Level . For a fixed buffer setting enter the Jitter Buffer Depth ,
which has a maximum setting of 5000ms, then press .
Important Notes: Automatic or fixed jitter buffer settings can be adjusted on individual
client codecs as required. There is no jitter buffer setting on the server codec because it
never receives audio packets.
7. Select Data to enable or disable data in the audio stream. See RS232 Data Configuration for
more information on data connections.
8. Select Proto (protocol) to select the audio protocol and adjust the Local Audio Port . Select
UDP/IP +RTP for RFC compliant IP streaming. Press to save settings.