manualshive.com logo in svg

Ti Lite aero 2gx, Руководство пользователя

Поделиться
Скачать
Ti Lite aero 2gx Скачать руководство пользователя страница 91

12-3

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 12: REAR WHEELS

Tools needed:

•  7/8” Open End Wrench

•   Two 3/4” Open End Torque Wrenches

1.  Place one of the 7/8” open end wrench onto the camber plug and use the second 3/4” open end torque wrench to 

remove the axle sleeve.  See Figure 12-5.

 Note:

 If you have only one washer and do not have a lock washer, your rear wheel spacing package will include a lock

 

washer.  Always use a lock washer.

2.  Add or remove the spacers you need to increase/ decrease your rear wheel spacing, keeping the two washers against 

the head of the axle sleeve.

3.  After you have adjusted your rear wheel spacing, reinstall the axle sleeve in the camber plug and hand-tighten.

4.  Using a torque wrench, tighten the axle sleeve to 230 inch-pounds.

 

     

 

 

        

                      Figure 12-5        

   Adjusting the Rear Wheel Spacing

Camber Plug

Washer

Lock Washer

Axle

Sleeve

Camber

Tube

1/2” Spacer

1/8” Spacer

 

     

 

     

 

     

            

Содержание aero 2gx














































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды