Ti Lite aero 2gx Скачать руководство пользователя

Страница: 47 / 109

5-1

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 5: ARMRESTS

Swing Away Armrest

To swing away the armrest, lift the armrest and rotate the

armrest away from the chair. See Figure 5-1. Make sure to

lift the armrest until the armrest saddle is above the notch on

the receiver.

To replace the armrest, rotate the armrest back towards the

chair and gently push it down into place. See Figure 5-1.

Make sure the armrest saddle is in the notch on the receiver.

Note

: On all TiLite wheelchairs, the swing away armrests

pivot on nylon sleeves, located inside the armrest receiver.

If the armrest does not rotate properly, remove the armrest,

clean the armrest and inside the receiver thoroughly. If this

does not solve the problem, check the armrest and the nylon

sleeves for wear.

Adjusting the Height

Tools Needed:

• 5/32” Allen Wrenches

1. Remove the armrest from the receiver.

2. Remove the Allen screw and washer from the armrest

saddle. See Figure 5-2.

3. Slide the armrest saddle to the desired position.

Reassemble the Allen screw and washer in the desired

location on the armrest (in 3/4” increments).

4. Securely tighten the Allen screw in the new location.

5. Reinstall the armrest in the armrest receiver.

Figure 5-1

Swing Away Armrest

Armrest

Saddle

Receiver

Armrest

Receiver

Armrest

Saddle

Figure 5-2

Adjusting the Height

Washer

Allen

Screw

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды