Ti Lite aero 2gx Скачать руководство пользователя

Страница: 59 / 109

7-3

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

6. Securely attach the padded back to the backrest ears using the Velcro

-style material and lower the back flap back into

position.

Figure

7-3

Adjusting/Replacing Back Upholstery

Allen

Screw

Allen

Screw

Back

Cane

Backrest Ears

Strap

Back

Flap

Padded

Back

Replacing

Tools Needed:

• 1/8” Allen Wrench

1. Lift the back flap to expose the backrest ears. See Figure 7-3.

2. Completely detach the two backrest ears and strap(s) from the padded back and remove them from the back canes.

Note:

If your chair has Integrated or Fold-Down Push Handles, you will need to remove the bolts that secure the

backrest ears to the back canes and the bolts that secure the backrest posts inside the back canes.

3. Remove the seat cushion.

4. Cut the plastic ties that secure the bottom of the back upholstery to the frame.

5. Attach the plastic ties that secure the bottom of the new back upholstery to the frame.

6. Install the two new backrest ears on the back canes.

7. Adjust to the desired tautness. See “Adjusting the Tension” on page 7-2.

8. Align the top of the padded back with the two backrest ears to ensure that the top of the back upholstery is even with

the top of the back canes.

9. Reinstall the strap(s) and adjust to the desired tautness.

10. Securely attach the padded back to the backrest ears and lower the back flap back into position.

11. Replace the seat cushion.

Corbac

Adjustable Contour Back Support

For information regarding the use and adjustment of the Corbac

Adjustable Contour Back Support, consult the owner’s

manual provided by the manufacturer, Ride Designs.

Tension Adjustable Slide-In Seat Sling

WARNING

Do not make the tension of the seat sling upholstery so loose that it does not properly support your weight. You must never

permit the sling to become so loose that your weight is borne by the crosstubes below the seat sling.

If you ignore this

Warning, you may develop pressure sores, which can be a life-threatening medical complication.

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды