Ti Lite aero 2gx Скачать руководство пользователя страница 89

Страница: 89 / 109

12-1

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 12: REAR WHEELS

WARNING

Do not attempt any of the procedures in this chapter if the chair is occupied.

If you ignore this Warning, serious injury to the

occupant will occur.

Rear Wheel with Quick-Release Axle

Removing

1. Hold wheel securely at the hub. See Figure 12-1.

2. Depress the release button on the quick-release axle

and slide the wheel and axle out of the axle sleeve.

3. Release the release button.

Replacing

WARNING

Make sure the locking balls fully secure the quick-release

axle inside the axle sleeve before operating the chair.

you ignore this Warning, you may fall, tip over or lose

control of the wheelchair and seriously injure yourself or

others or damage the wheelchair.

1. Hold wheel securely at the hub. See Figure 12-1.

2. Depress the release button on the quick-release axle,

making sure the locking balls recess into the axle.

3. Insert the axle all the way into the axle sleeve.

4. Release the release button.

5. Pull firmly on the wheel (without depressing the release

button) to make sure the wheel is locked securely in place.

Rear Wheel with Quad Quick-Release Axle

Removing

1. Unlock the lever on the quad quick-release axle.

See Figure 12-2.

2. Slide wheel and axle out of the axle sleeve.

Replacing

WARNING

Make sure the locking balls fully secure the quad quick-

release axle inside the axle sleeve before operating the

chair.

If you ignore this Warning, you may fall, tip over

or lose control of the wheelchair and seriously injure

yourself or others or damage the wheelchair.

1. Hold the wheel securely at the hub. See Figure 12-2.

2. Unlock the lever on the quad quick-release axle.

3. Insert the axle all the way into axle sleeve.

4. Lock the lever on the quad quick-release axle.

5. Pull firmly on the wheel (without unlocking the lever)

to make sure the wheel is locked securely in place.

Figure 12-1

Removing/Replacing the Rear Wheel

Axle

Release

Button

Hub

Figure 12-2

Removing/Replacing the Rear Wheel

with Quad Quick-Release

Axle

Hub

Release

Lever

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды