Ti Lite aero 2gx Скачать руководство пользователя страница 23

Страница: 23 / 109

1-11

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 1: WARNINGS

11. ALWAYS be alert for wet or slippery conditions or surfaces, any changes in the grade of the slope (such as a lip, bump

or depression), and any drop-off or lip at the bottom of a slope. For example, even a 3/4 inch lip at the bottom of a ramp

can cause the casters to stop and cause the chair to tip forward.

12. Ramps at your home and work must meet all legal requirements for your area, including building codes. If you are

having a ramp installed at your home or work, ALWAYS make sure it complies with local legal requirements.

If you ignore these Warnings, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others

or damage the wheelchair.

J. STAIRS

WARNING

NEVER use your wheelchair on stairs without the assistance of at least two (2) able-bodied assistants or attendants and

ONLY AFTER such assistants or attendants have read and understand the Warnings “Climbing a Flight of Stairs” and

“Descending a Flight of Stairs” on pages 1-5 to 1-6.

If you ignore these Warnings, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others

or damage the wheelchair.

K. ESCALATORS

WARNING

NEVER use your wheelchair on an escalator, not even with an assistant or attendant.

If you ignore these Warnings, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others

or damage the wheelchair.

L. ASSISTANTS AND ATTENDANTS

WARNING

Before you permit any person to assist you in any aspect of riding your wheelchair, you MUST require that the assistant or

attendant fully read, understand and follow the Warnings contained in this Manual.

If you ignore these Warnings, you may fall, tip over or lose control of the wheelchair and seriously injure yourself or others

or damage the wheelchair.

WARNINGS REGARDING COMPONENTS AND OPTIONS

A. ANTI-TIPS

WARNING

Anti-tips are an optional accessory that can help to prevent your chair from tipping over backward. However, even the use of

anti-tips will not guarantee that your chair will not tip over backward. Also, they will not prevent your chair from tipping over

sideways or forward.

TiLite strongly recommends you use anti-tips with your wheelchair. This is most especially true:

1. if you are a new wheelchair rider; or

2. even if you are an experienced rider but you are switching to a new wheelchair, regardless of whether the prior chair

was as lightweight as your TiLite; or

3. even if you are an experienced rider in your TiLite chair but you have made any modifications or adjustments to the

configuration of your chair, such as changing the position of the front or rear wheels, changing the seat height, changing

the camber or changing the seat or back angle. Any modification or change to your chair can make it easier to tip over

and you should use anti-tips until you have adapted to the modified configuration; or

4. even if you are an experienced rider in your TiLite chair but your physical condition has changed.

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Бренды по названию

Популярные бренды