Ti Lite aero 2gx Скачать руководство пользователя страница 63

Страница: 63 / 109

7-7

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 7:

BACK UPHOLSTERY, SEAT UPHOLSTERY AND SEAT

CUSHIONS

For seat cushions manufactured by manufacturers other than TiLite (e.g. ROHO, Supracor or Varilite), consult the owners

manual provided by the applicable manufacturer.

Velcro

-Style Adjustable Seat Belt

WARNING

Installation of the Velcro

-Style Seat Belt must be performed by an authorized TiLite dealer or qualified technician.

If you

ignore this Warning, serious injury may result.

WARNING

The Velcro

-Style Seat Belt must be worn tightly fitted across the lower pelvis or thighs at all times. A loose belt can allow

the user to slip down and create a risk of strangulation. Have your seating specialist demonstrate its proper adjustment and

use. See Figures 7-8 and 7-9.

Accidental release of the Velcro

-Style Seat Belt can allow the user to slip down or fall from the wheelchair. The user’s

movements or cognitive abilities could lead to accidental release, a caregiver must be present at all times during its use.

Ensure that all caregivers know how to properly use the product. Failure to do so may delay release in an emergency.

As with any new seating support, the Velcro

-Style Seat Belt may change the way a person sits. Users must continue to

practice regular pressure relief activities and skin integrity checks, not only where this product contacts the user, but also

in primary pressure-bearing areas such as the sacrum, legs, and buttocks. If increased skin redness or irritation occurs,

discontinue use and consult your physician or seating specialist. Failure to do so may result in serious injury, such as

pressure ulcers.

If you ignore any of these Warnings, you may incur serious or life-threatening injuries.

Installation

Install the seat belt as shown in Figure 7-8.

Figure 7-8

Velcro

-Style Seat Belt

Adjustment

When the belt is properly adjusted and tightened, it should fit snug so that the user’s pelvis is secure. If length adjustment is

necessary to achieve a good fit or to remove the belt for cleaning, this can be done using the belt end fittings.

Safety Check

When properly positioned in the wheelchair, the wheelchair user should lean forward and side to side to check the fit.

Check for:

1. Normal operation of adjustment straps.

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды