Ti Lite aero 2gx Скачать руководство пользователя

Страница: 76 / 109

10-2

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 10: WHEEL LOCKS

Compact Pull to Lock

Adjusting

Tools Needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the Allen screws in the wheel lock clamp. See Figure 10-2.

2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 3/16” into the tire when

engaged in the locked position.

3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame.

Figure 10-2

Adjusting/Replacing

Wheel

Lock

Clamp

Frame

Wheel

Stop

Tire

Allen

Screws

Replacing

Tools Needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the two Allen screws that secure the wheel lock clamp to the frame. See Figure 10-2.

2. Slide the wheel lock out of the clamp.

3. Slide the new wheel lock into the wheel lock clamp, but do not tighten the Allen screws.

4. Follow the procedures under “Compact Pull to Lock - Adjusting” on page 10-2 to position and secure the new wheel

lock.

Compact Push to Lock and Compact Pull to Lock with Extension Handles

All of the adjustments set forth under ”Compact Push to Lock and Compact Pull to Lock” on pages 10-1 to 10-2 apply to the

Compact Push to Lock and Compact Pull to Lock with Extension Handles.

Uni-Lock

Adjusting

Tools Needed:

• 3/16” Allen Wrench

1. Loosen, but do not remove, the two Allen screws in the wheel lock clamp. See Figure 10-3.

2. Adjust the position of the wheel lock clamp on the frame so the wheel stop embeds at least 3/16” into the tire when

engaged in the locked position.

3. Securely tighten the two Allen screws that secure the wheel lock clamp to the frame.

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды