Ti Lite aero 2gx Скачать руководство пользователя

Страница: 46 / 109

4-4

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 4: BACKRESTS, PUSH HANDLES AND STROLLER HANDLES

Changing the Backrest Angle

Follow the instructions under “Changing the Backrest Angle” on page 4-2.

Adjusting the Backrest Height

Follow the instructions under “Adjusting the Backrest Height” on page 4-3.

Adjusting the Depth of the Backrest

Follow the instructions under “Adjusting” on pages 7-5 and 7-6.

WARNING

Any changes to the depth of the backrest will affect the stability (i.e. center of gravity) of the chair. Use extreme caution

when using a new backrest depth as it may make the chair more prone to tip over. After adjusting the depth of the backrest,

you must consider whether additional changes need to be made to compensate for the modified stability of the chair (e.g.,

changing the rear axle position, backrest angle, rear seat height).

If you ignore this Warning, your chair may not perform

properly, which in turn, may cause you to fall, tip over or lose control of the chair and seriously injure yourself or others or

damage the chair.

Height Adjustable Push Handles

Adjusting the Height

1. Turn the adjustable handle to the left to loosen the push

handle. See Figure 4-7.

2. Raise or lower the push handle to the desired height.

3. Securely tighten the adjustable handle by turning it right to

it’s original position.

Fold Down Push Handles

To adjust the height of the Fold Down Push Handle please follow the procedures under “Adjusting the Backrest Height” on

page 4-1.

Figure 4-7

Adjusting the Height

Adjustable

Handle

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды