Ti Lite aero 2gx Скачать руководство пользователя страница 107

Страница: 107 / 109

14-11

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 14: TRANSPORTATION OPTIONS

RATING OF ACCOMMODATION OF VEHICLE-ANCHORED BELT RESTRAINTS

In accordance with ISO 7176-19 Annex D, the TiLite wheelchairs were evaluated by an independent, university

test facility with regard to the effective use of a vehicle-anchored three-point belt restraint system.

The TiLite Aero X received an overall score of 13 points for a rating of C.

SEATING OPTIONS

WARNING

The TiLite Aero X wheelchair was crash-tested in accordance with ISO 7176-19 only with TiLite

Tension Adjustable Bolt-On seat upholstery and Tension Adjustable by Straps back upholstery.

Therefore, these are the only seating options approved by TiLite for use with the TiLite Transit Tie-

Down Option. If you order your TiLite wheelchair with the Transit Tie-Down Option and you use seating

components other than these, the performance of the other seating system or upholstery is unknown.

Therefore, TiLite makes no warranty or claim as to the performance of the TiLite wheelchair in the

event of a motor vehicle accident of any type, even if the other seating system was crash tested with

a different manufacturer’s wheelchair or with a surrogate wheelchair in accordance with ANSI/RESNA

WC/20.

WARRANTY MODIFICATION

A copy of the TiLite Limited Warranty was enclosed with your new wheelchair when it was shipped from our

factory. Our warranty is also available on our website, www.tilite.com. That Limited Warranty applies to your

TiLite wheelchair with the Transit Tie-Down Option, with the following modification: The warranty is void if the

wheelchair is damaged as a result of transit use.

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды