Ti Lite aero 2gx Скачать руководство пользователя

Страница: 82 / 109

11-2

2GX/AERO X Owner’s Manual

OM0002_Rev A_2GX/AERO X

CHAPTER 11: CASTERS, FORKS AND CASTER PIN LOCKS

WARNING

The fork stem is permanently installed in the “Bullet” Caster Housing. Do not attempt to unscrew the fork stem. If you have

a 2GX or Aero X and it becomes necessary to replace the fork stem, you will need to order the “Bullet” Caster Housing/fork

stem assembly.

If you ignore this Warning, you may fall, tip over or lose control of the wheelchair and seriously injure

yourself or others or damage the wheelchair.

1. Remove the casters. See “Replacing Casters” on page 11-1.

2. Loosen and remove the nylock nut and washer that secure the fork to the fork stem. See Figure 11-1.

3. Remove the old fork and install the replacement fork on the fork stem.

4. Replace the nylock nut and washer and securely tighten.

5. Reinstall the casters. See “Replacing Casters” on page 11-1. With the chair tipped backward so that the stem bolt is

parallel to the ground, when released, the caster should swing passed perpendicular then return perpendicular to the

ground.

Casters and Bearing Forks

(Hemi Height)

WARNING

Always mount identical size casters and forks on both sides of your chair.

If you ignore this Warning, you may fall, tip over

or lose control of the wheelchair and seriously injure yourself or others or damage the wheelchair.

Replacing Casters

To replace the casters, please follow the instructions under “Casters and Bearing Forks - Replacing Casters” on page 11-1.

Replacing Bearing Forks

To replace the forks, please follow the instructions under “Casters and Bearing Forks - Replacing Bearing Forks” on pages

11-1 and 11-2.

Figure 11-2

Hemi Height Bearing Forks

“Bullet” Caster

Housing

Fork Stem

Phillips

Head

Screw

Fork

Spacer

Caster

Spacer

Phillips

Head Screw

Axle

Nylock Nut

Washer

C Spring

Washer

C Spring

Washer

Содержание aero 2gx














































































































Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды

Ti Lite aero 2gx, Руководство пользователя

Результаты поиска

Содержание aero 2gx

Отзывы:

Похожие инструкции для aero 2gx

Бренды по названию

Популярные бренды