TI120 Series Variable Frequency Drive
Detailed parameter introduction
- 96 -
deceleration time
deceleration time selection 1
deceleration time
selection 2
P02.00
、
P02.01
OFF
OFF
P02.02
、
P02.03
ON
OFF
P02.04
、
P02.05
OFF
ON
P02.06
、
P02.07
ON
ON
22: acceleration and deceleration forbidding
When the "acceleration and deceleration prohibited" terminal function is valid, the variable
frequency drive maintains the output frequency unchanged.
Prohibited Acceleration
and Deceleration
ON
Time
Output frequency
Setting frequency
Figure 5-9 Schematic Diagram of Prohibited Acceleration and Deceleration
23: command switch to keyboard control
When the terminal function is valid, the run command is switched to keyboard control.
24: command switch to terminal control
When the terminal function is valid, the run command is switched to terminal control.
25: command switch to communication control
When the terminal function is valid, the run command is switched to communication control.
26: frequency source switching (P00.06[ ones])
When the terminal function is valid, it is switched according to the frequency source selected by the
ones of P00.06.
27: main frequency source switch to frequency digital setting
When the terminal function is valid, the frequency setting mode is switched to P00.00 setting.
28: auxiliary frequency source Switch to frequency digital setting
When the terminal function is valid, the frequency setting mode is switched to P00.02 setting.
29: stop DC stop command
When the terminal function is valid, the variable frequency drive decelerates and stops firstly. When
the output frequency is lower than the setting value of DC braking initial frequency P01.11, it starts to
