TI120 Series Variable Frequency Drive
Detailed parameter introduction
- 85 -
P02.05
Deceleration time 3
range:0.1s~3600.0s
Factory default:
Model determination
P02.06
Acceleration time 4
range:0.1s~3600.0s
Factory default:
Model determination
P02.07
Deceleration time 4
range:0.1s~3600.0s
Factory default:
Model determination
Acceleration time: refer to the time required for the variable frequency drive to accelerate from zero
frequency to the maximum frequency P00.07.
Deceleration time: refer to the time required for the variable frequency drive to decelerate from the
maximum frequency P00.07 to zero frequency.
P00.07
Setting frequency
Actual acceleration time
Setting acceleration time
Actual deceleration
time
Setting deceleration
time
Time
Output frequency
Figure 5-3 Schematic diagram of acceleration and deceleration time
4 groups of acceleration and deceleration time are selected through the switching value input
"acceleration and deceleration time selection 1, acceleration and deceleration time selection 2" terminal
function. Please refer to the P10 group function code for specific usage.
P02.08
Emergency stop deceleration
time
range:0.1s~3600.0s
Factory default:
Model determination
When the variable frequency drive receives the emergency stop command, it decelerates and stops
according to the deceleration time defined in P02.08. The emergency stop command is determined by
the switching value input "emergency stop" terminal function.
P02.09
Inching acceleration time
range:0.1s~3600.0s
Factory default:
Model determination
P02.10
Inching deceleration time
range:0.1s~3600.0s
Factory default:
Model determination
