Thermo Scientific thermoscientific Vanquish UHPLC System, Руководство по эксплуатации

Страница: 36 / 148

4 • Unpacking
Page 36 UHPLC System
Operating Manual
4.1 Unpacking
Damaged Packaging, Defective on Arrival
Inspect the shipping container for signs of external damage and, after
unpacking, inspect the system for any signs of mechanical damage that
might have occurred during shipment.
If you suspect that the system may have been damaged during
shipment, immediately notify the incoming carrier and Thermo Fisher
Scientific about the damage. Shipping insurance will compensate for the
damage only if reported immediately.
Unpacking the Solvent Rack and System Base
To unpack the solvent rack and system base, follow these steps:
1. Place the shipping container on the floor and open it.
2. Remove the ship kit.
3. Carefully remove the solvent rack and liquid reservoirs from the
shipping container.
4. Place the solvent rack on a stable surface.
5. Carefully remove the system base from the shipping container.
6. If applicable
Remove any additional packing material.
7. Place the system base on a stable surface.
TIP Keep the shipping container and all packing material. These items
will be needed if the system is transported to a new location or shipped.
Unpacking the System Modules
For details on unpacking and moving the system modules, refer to the
Operating Manual of each module.