Thermo Scientific thermoscientific Vanquish UHPLC System, Руководство по эксплуатации

Страница: 80 / 148

5 • Installation
Page 80 UHPLC System
Operating Manual
Adding the Vanquish System
1. On the Edit menu, click Add Instrument to add a new instrument
(system).
2. Select the new instrument and click Add Module on the Edit menu
to add the first module.
3. In the Add module to instrument dialog box, on the Manufacturers
list, select Thermo Scientific HPLC: Vanquish and on the Modules
list, select the module you want to add, for example, Vanquish
Binary Pump . Repeat this step for each module of the system.
4. On the General configuration page for each module, make sure that
simulation mode is deactivated and click Browse to select the
module address.
The Chromeleon software connects to the module and transfers the
settings from the device firmware to the software. Check and
change the settings on the other configuration pages if necessary.
For information about the settings, click
Help or press the F1 key.
Figure 33: Software configuration: select module address (here: pump)
5. On the File menu, click Save Installation and then close the
Instrument Configuration Manager.