Thermo Scientific STP420D Скачать руководство пользователя страница 72

Страница: 72 / 126

Thermo Fisher Scientific

User Guide STP420D/STP420ES

routine operations

Starting a Protocol

• Select

Open

to open the chamber without draining the reagent.

• Select

Terminate

to start draining the final reagent and release

the chamber for opening.

The touch screen displays protocol progress either as a graphic or as a

table.

From the start the device performs a protocol of various self-tests,

including a pressure test. When the chamber is not closed properly, the

screen displays an error code.

When the preparatory tests are completed successfully, the protocol first

step starts.

To prevent misuse of the device, the touch screen is locked. and will

show the “Locked” icon (see Section 1-6 User Profiles) in the Status

window (see Section 1-5-3 Status window):

Protocol progress

Figure 32.

Display of the “Locked“ icon.

[1]

Locked

[1]

Содержание STP420D































































































































Результаты поиска

Содержание STP420D

Отзывы:

Thermo Scientific STP420D, Инструкция по эксплуатации, Страница: 72 / 126

Результаты поиска

Содержание STP420D

Отзывы: