20
Thermo Fisher Scientific
User Guide STP420D/STP420ES
A console with integrated interfaces is located on the left side of the
device (see Fig. 3a) or on the left side of the monitor (see Fig. 3b).
These are for the type II interfaces:
•
Modem COM 3:
For remote diagnostics and remote control of
individual functions
•
LPT1:
Connector provided, but not intended for use
•
Mouse:
Not necessary, but can be connected to the PS-2 interface
for service purposes
•
Keyboard:
Not necessary, but can be connected to the PS-2
interface for service purposes
•
RJ45/LAN:
To establish a connection to a service technician’s
laptop
•
Two USB ports:
For storing protocols on the USB data stick
provided
Note!
USB data sticks: Only use the USB data stick provided – others will not
work. If the USB data stick provided does not work initially, shut down the
STP420 (
Section 3-1-2 Turning the instrument off
), plug the USB into
the USB port and turn the device on.
•
3.5-inch floppy disk drive:
For storing protocols on a 3.5-inch
(1.44 Mbyte) disk
1-3 interfaces
Figure 3a.
Interfaces (type II) on the left side of the instrument.
introduction
Interfaces
