Thermo Scientific STP420D Скачать руководство пользователя страница 70

Страница: 70 / 126

Thermo Fisher Scientific

User Guide STP420D/STP420ES

routine operations

Starting a Protocol

Refer to “Appendix F Preferred Protocols and Best Practices”.

1. On the standby screen, select the appropriate chamber by selecting

either

Rotation

Biopsy

. If no protocol is currently being

processed in this chamber, a list of predefined protocols appears:

• If a protocol is already running in this chamber, the running

program will be displayed.

• Depending on the situation, different command buttons appear

at the bottom of the screen.

2. Select a protocol from the list and touch

Start

in the lower part of

the screen to start it.

Note!

Protocol duration: The time the protocol is expected to end is displayed on the

screen, taking into consideration the heating and reagent changing times.

3. In case a wait step is already defined in the protocol, you can

select

to change the defined fixed end of the protocol. This

corresponds to the definition of a fixed end time of a protocol - the

protocol will remain longer in the predefined wait step.

• The

button appears only if a wait step was predefined in the

protocol.

• Select

Yes

to go ahead and start the protocol.

Note!

Start time: If the start time is too late for the protocol to run and complete

within the remaining time, the end date automatically changes to the next

day, and the time box appears in red to indicate the postponement.

Note!

Unavailable reagents: If a protocol uses predefined reagents which are

not available in the instrument, the screen displays an error code and the

protocol is cancelled.

3-5 Starting a Protocol

3-5-1 running a protocol

Figure 31.

Detail of the initial screen for starting a protocol.

No.

Name

Stress TEST Nacht

11:05

4:37

0:09

Stress TEST Tag

test

Duration

Quick button

Содержание STP420D































































































































Результаты поиска

Содержание STP420D

Отзывы:

Похожие инструкции для STP420D

Бренды по названию

Популярные бренды

Thermo Scientific STP420D, Инструкция по эксплуатации

Результаты поиска

Содержание STP420D

Отзывы:

Похожие инструкции для STP420D

Бренды по названию

Популярные бренды