Thermo Scientific Shandon Excelsior ES Скачать руководство пользователя страница 8

Страница: 8 / 131

Shandon Excelsior ES Operator Guide

Safety Information

ThiS SECTioN DETAilS iMPoRTANT SAfETy iNfoRMATioN.

PlEASE READ All of ThiS SECTioN CAREfUlly.

Thermo products are designed for convenient and reliable

operation and to accepted standards of safety. Their use does not

entail any hazard if operated in accordance with the instructions

given in this manual. However, incorrect actions by user may

damage this equipment, or cause a hazard to health. It is

important for you to obey the following safety precautions:

• All users must read and understand the Operator Guide and

only operate the unit in accordance with the instructions.

If the instructions are not followed, then the protection

provided by the instrument may be impaired.

• Do not modify the instrument - if unauthorised modifications

are carried out, the instrument may be made unsafe and the

warranty may be invalidated.

• Potentially lethal voltages above 110V AC or 50V DC are

present inside the instrument. The instrument must be

properly connected to a good earth (Ground) via the mains

input supply.

• Do not remove any panels or covers. There are no user

serviceable parts inside the instrument.

• It is important to maintain normal standards of safety and

Good Laboratory Practices. Always use common sense and

the best known practice when operating the instrument.

Содержание Shandon Excelsior ES




































































































































Результаты поиска

Содержание Shandon Excelsior ES

Отзывы:

Похожие инструкции для Shandon Excelsior ES

Бренды по названию

Популярные бренды

Thermo Scientific Shandon Excelsior ES, Руководство оператора

Результаты поиска

Содержание Shandon Excelsior ES

Отзывы:

Похожие инструкции для Shandon Excelsior ES

Бренды по названию

Популярные бренды