Thermo Scientific Shandon Excelsior ES, Руководство оператора

Страница: 49 / 131

49 Shandon Excelsior ES Operator Guide
Before loading of dehydrants, the reaction chamber must be
flushed, as prompted by the [START] option key displayed.
Select [START].
This involves
Filling the empty
• Ex1
bottle with dehydrant at each
concentration as highlighted on the Load Reagents screen.
Transferring the reagent from
• Ex1
into the reaction chamber
and then into the concealed bottle.
Bottle A1 is outlined on the screen.
Fill a bottle (between 3.8 L and 5.0 L) with alcohol diluted to 75%.
1.
Put the bottle in position
2. Ex1
, and insert the BLUE tube
(with cap).
Select [CONFIRM LOADED] to start the
3.
dehydrant
reagent transfer.
The next bottle, A2 is outlined on the screen.
Repeat the above steps to load dehydrants A2 - A6.
Load A2 with 90 % alcohol.
Load A3 with 95 % alcohol.
Load A4 - A6 with 100 % alcohol.
This involves
Placing a bottle of clearant in position Ex 2.
•
Transferring the reagent from Ex 2 into the reaction chamber
•
and then into the concealed bottle.
If xylene is used as the clearant,
X1 Xylene
is highlighted and
bottle
X1
outlined on the screen.
Put the bottle of clearant in position
1. Ex2
, and insert the
RED tube (with cap).
Select [CONFIRM LOADED] to start the clearant reagent
2.
transfer.
Repeat the above steps to load clearants
X 2
and
X 3.
Loading
Dehydrants
Loading
Clearants