Thermo Scientific Shandon Excelsior ES, Руководство оператора

Страница: 109 / 131

109 Shandon Excelsior ES Operator Guide
fitted liner. A spare waste wax tray is provided.
Slide the tray back into its position above the wax baths and close the access
doors.
THE METAL PLATES IN THE BASE OF THE WAX BATHS ARE
HOT. ALWAYS WEAR GLOVES.
After the old wax is discarded, Wax Bath 3 is empty (a). Open the left
hand wax access door. Use absorbent paper to wipe out any remaining wax
from the wax bath. Make sure that no paper is left in the wax bath.
Open the lid and use the plastic spatula provided to remove any solidified
wax from the lid, top and sides of the Reaction Chamber. If necessary,
wipe the surfaces with absorbent paper and small amount of xylene.
THE LID SEAL AND TOP SURFACE OF THE REACTION CHAM-
BER MUST BE KEPT CLEAR OF WAX FOR THE INSTRUMENT
TO OPERATE CORRECTLY.
THE LID SEAL CANNOT BE REMOVED FOR CLEANING. - DO
NOT TRY TO REMOVE IT.
Cleaning
Wax Baths
Reaction Chamber