Service Procedures
Doc. 031880-04 1/12
85
2. Locate the corrugated drain tubing in the Dionex RFC Ship Kit. Push
the tubing onto the fitting on the drip tray spout. Install the drip tray
with the spout and drain line between the vertical posts in the rack
(see Figure 97).
Figure 97. Drip Tray with Drain Line
3. Route the drain line to a waste container.
4. Slide the EGC holder, with the tubing and cables between the vertical
posts, into the rack (see Figure 98).
Figure 98. EGC Installed on Rack
Drain Line
Drip Tray
Spout
