Operation
Doc. 031880-04 1/12
25
the remaining parameters and enter new settings as needed before
turning on the device again.
Example Dionex RFC-30 Setup for
Automatic Calculation
This example shows how to set up a Dionex RFC-30 for use with a
system with the following operating conditions: AS18 column, 2-mm
ASRS suppressor, 1.0 mL/min flow rate, and a KOH EGC.
To set the EGC type:
1. From the default screen, press
twice to display the generator type
screen.
Figure 16. EGC Type Screen
2. Press
ENTER
. The
GENERATOR TYPE =
entry field on the screen is
highlighted.
Figure 17. Selecting the EGC Type
3. Press
to select type, for example KOH.
Figure 18. Example EGC Type Selected
4. Press
ENTER
to save the entry.
