Thermo Scientific DensityPRO NAI Series, Руководство пользователя

Страница: 155 / 196

Thermo Scientific DensityPRO User Manual B-1
Appendix B
Flashing the Application Firmware
Flash
Application
Firmware
The first time you apply power to the gauge, the screen shown in Figure B-1 should
display. If this screen does not appear, the gauge has been at least partially set up. If
you are unsure about what settings have been entered, or if the gauge has been moved
to a new location, it is recommended that the gauge be reset to the factory defaults and
set up again. To reset all entries in EZ Cal II, including the communication settings, to
the factory defaults, go to Commands

Common Action

Erase all Ram and set
defaults (Cold Start).
If access to this screen is desired at a later time, it may be accessed by selecting PC
Comm Setup from the Functions dropdown menu at the top of the screen, or by
clicking the first icon button, which is circled in Figure B-1.
Figure B-1. Local PC Communication Setup Screen