Thermo Scientific DensityPRO NAI Series, Руководство пользователя

Страница: 119 / 196

Operation
Application Screens
Thermo Scientific DensityPRO User Manual 4-67
2. Make a selection from the Input dropdown to designate which input to totalize.

None – No input is selected to totalize. The Totalizer Value will not increase.

Measurement #1: The value of Measurement #1 is totalized. This will be
either the Live or Hold value, depending on what the Hold/Live field is set to
for Measurement #1 on the Application Action tab.

Measurement #2: The value of Measurement #2 is totalized. This will be
either the Live or Hold value, depending on what the Hold/Live field is set to
for Measurement #2 on the Application Action tab.

Measurement #3: The value of Measurement #3 is totalized. This will be
either the Live or Hold value, depending on what the Hold/Live field is set to
for Measurement #3 on the Application Action tab.

Measurement #4: The value of Measurement #4 is totalized. This will be
either the Live or Hold value, depending on what the Hold/Live field is set to
for Measurement #4 on the Application Action tab.
3. Select a measurement unit from the Totalizer Value dropdown. The available units
are:

US gallon

Imperial gallon

Cubic centimeter

Cubic meter

Cubic inch

Cubic feet

Cubic yard

Ounces

Pounds

Short tons

Long tons

Kilograms

Metric tons

Grams
4. The totalizers give the user the option to link measurement data to a totalizer by
selecting Measurement # from the Input dropdown. The measurement value of
the specified Measurement # will then be input into the totalizer. The value of the
input must be greater than or equal to the value entered in the Threshold Limit
field before the totalizer value will accumulate. When this condition is met, the
total of the input value is accumulated.